Preventive maintenance of electric terminals in your apartment, building, or factory cannot be overlooked. Expert professionals of electrical infrared Los Angeles can be found online or in local directories. Infrared technology is the recommended diagnostic method to detect weak spots in the circuit and switchgear of your building.
Current flows through conductors upon application of voltage across the terminals. If resistance increases for the flow of current, the conductor will dissipate additional power and heat up. Most of the electrical connections tend to become hot before they fail. The electromagnetic radiation cameras are able to detect rise in temperature and suggest maintenance before the heat causes failure and serious damage.
These detectors basically identify the hot spots or connections in the system. It should be noted that all electrical connections usually heat up before they burn up and fail. This is because of a high increase in resistance in that particular location.
It is well known that current flows through a conductor upon application of voltage across the terminals. In case the resistance of the conductor at any location increases, the current dissipates more power through the same conductor. The excess power is manifested through thermal energy and therefore the temperature increases.
A lot of factors are responsible for this increase in resistance. A few of them include wear, loose connection, oxidation, age of the component, fatigue, or poor installation. The infrared camera can capture the high temperature image of all the hot spots as well as the actual temperature.
The infrared electrical survey, therefore, can save both time and money. It also reduces the risk factors associated with a malfunctioning unit. Unattended faults not only create component failures, but they may lead to fire hazards or other catastrophic failures. There are plenty of examples of how the losses of life and property due to catastrophic failures have damaged industrial development.
The infrared inspection therefore helps detect and document any potential defects or failures in the systems operated by electricity. The infrared scanning covers all the electrical connections and installations such as distribution panels, motor control centers, sub-feed panels, transformers, variable frequency drives, etc. Timely repairs or replacement of the problems help clients save lots of money that would have been spent if the problem was overlooked and the entire component was to be replaced. It also mitigates the safety hazards associated with failure or damage as well.
The electromagnetic radiation survey detects any loose connections, open circuits, overloads, defective equipment, unbalanced load, harmonics, and open circuits. If the weaker connections in these areas are repaired in time, it saves both money and production loss due to unpredicted or unscheduled shutdown.
Efficiency of the factory also improves due to less costly maintenance, prevention of damage, reduced production loss, and mitigating risk factors. Not only do the manufacturers realize the importance of the infrared survey; the building owners, property managers, and facility directors also feel the necessity of the survey. It reduces the risk of catastrophe and improves the safety of lives and property.
The entire system including the distribution panels, switchgear, transformers, sub-feed panels, bus ducts, variable frequency drives, motor control centers, etc. Can be inspected during the survey. To get the maximum benefits of this survey, it is recommended to be carried out annually. It is the most cost-effective predictive maintenance system one can think of, but well worth the price.
Current flows through conductors upon application of voltage across the terminals. If resistance increases for the flow of current, the conductor will dissipate additional power and heat up. Most of the electrical connections tend to become hot before they fail. The electromagnetic radiation cameras are able to detect rise in temperature and suggest maintenance before the heat causes failure and serious damage.
These detectors basically identify the hot spots or connections in the system. It should be noted that all electrical connections usually heat up before they burn up and fail. This is because of a high increase in resistance in that particular location.
It is well known that current flows through a conductor upon application of voltage across the terminals. In case the resistance of the conductor at any location increases, the current dissipates more power through the same conductor. The excess power is manifested through thermal energy and therefore the temperature increases.
A lot of factors are responsible for this increase in resistance. A few of them include wear, loose connection, oxidation, age of the component, fatigue, or poor installation. The infrared camera can capture the high temperature image of all the hot spots as well as the actual temperature.
The infrared electrical survey, therefore, can save both time and money. It also reduces the risk factors associated with a malfunctioning unit. Unattended faults not only create component failures, but they may lead to fire hazards or other catastrophic failures. There are plenty of examples of how the losses of life and property due to catastrophic failures have damaged industrial development.
The infrared inspection therefore helps detect and document any potential defects or failures in the systems operated by electricity. The infrared scanning covers all the electrical connections and installations such as distribution panels, motor control centers, sub-feed panels, transformers, variable frequency drives, etc. Timely repairs or replacement of the problems help clients save lots of money that would have been spent if the problem was overlooked and the entire component was to be replaced. It also mitigates the safety hazards associated with failure or damage as well.
The electromagnetic radiation survey detects any loose connections, open circuits, overloads, defective equipment, unbalanced load, harmonics, and open circuits. If the weaker connections in these areas are repaired in time, it saves both money and production loss due to unpredicted or unscheduled shutdown.
Efficiency of the factory also improves due to less costly maintenance, prevention of damage, reduced production loss, and mitigating risk factors. Not only do the manufacturers realize the importance of the infrared survey; the building owners, property managers, and facility directors also feel the necessity of the survey. It reduces the risk of catastrophe and improves the safety of lives and property.
The entire system including the distribution panels, switchgear, transformers, sub-feed panels, bus ducts, variable frequency drives, motor control centers, etc. Can be inspected during the survey. To get the maximum benefits of this survey, it is recommended to be carried out annually. It is the most cost-effective predictive maintenance system one can think of, but well worth the price.
No comments:
Post a Comment